BlueRetro
This page is a work in progress.
Important Notes
Remote power-on must be initialized first. After installing or updating, the Xbox must be powered on manually at least once before remote power-on will work. If the Xbox is disconnected from AC power, it must be powered on manually again before remote power-on becomes available.
BlueRetro firmware updates are included with Stellar firmware updates. You do not need to update BlueRetro separately.
Auto sync is enabled by default. When no wireless controller is connected, BlueRetro will automatically enter sync mode. Stellar modifies this behavior by adding a 60-second timeout to help avoid conflicts with other nearby Bluetooth hosts.
BlueRetro configuration is available through the BlueRetro web configurator: https://blueretro.io/
If a controller is already connected, you must either enter scanning mode from StellarOS or disconnect the controller before using the configurator.